Samsung G610f Flash File [Stock ROM/Firmware]

The Samsung g610f flash file began rolling from September 2019 to new latest smartphone security patch with build no. G610FXWS1CSI1. Also, it is noted that the updated Android 8.1.0 with the latest patch is best in and around the US and Asia. In case you have not gone on to receive the latest update version on the Galaxy J7 smartphone, you may go manually when it comes to checking the software update in the setting.

Know the ways to Flash the Samsung G610f

Ensure the device is at least 30% charged when performing the flash.

  1. You need to switch off your device.
  2. Press that Power button followed by volume down & home button
  3. The symbol of your android will appear, then press the volume + button to enter into that downloading mode
  4. Open the Odin flash tool, then follow all the steps showcased in a video
  5. Select the Samsung G610f
  6. Choose the tool Odin and open it
  7. Choose BL file
  8. Tap PDA or AP, then choose the AP File
  9. Tap CP and then select the Modem File.
  10. Tap CSC and choose CSC File.
  11. After the selection device will be detected automatically
  12. Then click start on the system & the installation will be in the process
  13. Once the installation is done, the device will switch ON.


The advantages of Stock ROM

Any software problem on the device that requires flash on Galaxy J7, Samsung G610F Flash File goes on to fix the Hang. On Logo Issue, unroot the device, fix the system bug, fix the Unknown Baseband alongside the IMEI Problem on Galaxy J7 Device, set one to install apps on their smartphone issue automatically, and several other problems.


 You need to download the latest version of the Samsung Universal Serial Bus Driver

  • Download the Latest Odin Flash Tool  Version
  • This Read-Only Memory work just on the Galaxy J7 smartphone.
  • Min Charge of 50% is needed.
  • One must Backup all the data.

You may look over the web and gather more info to know further.

Download Link

Leave a Comment